A lot of partner message, say have no idea how to estimate the wallpaper dosage in the house, today, we will have, how the wallpaper dosage is measured.
1. The general estimate is certainly 2.5 to 3.5 times the floor area of your room.
2. Please ask someone to consider the field measurement for you personally.
3. Calculation by yourself:
Step 1 1: know the wallpaper
Common wallpaper specification is normally: 53 centimeters wide width *10 meters long =5.3 Modern Style Wall covering square couple of blooms: the calculation of scroll size needs to add the loss of pair of flowers (pair of flowers is the design of two pieces of joint is joined together is continuous, is to make the pattern more essential).
Step two 2: measure the room
1. The height of the wallpaper portion of the room
2. The width of the wallpaper portion of the room. 3
Step 3: discover ways to apply wallpaper
The wallpaper is spliced and pasted throughout. The width of the wallpaper is usually 53 centimeters. Suppose the width of the wallpaper portion of the room is 40 centimeters.
The distance of a roll of wallpaper is 10 meters, cent is 3, one is 3.33 meters, the wallpaper which has decorative pattern, want to be joined up with between each piece (call couple of flower), flower model is bigger (the distance between two same pattern, weigh flower distance), when two wall paper couple of flower, loss is normally bigger also. So, a roll three, after great flower, the width of every piece could be only 3 meters or smaller sized sometimes, therefore metope elevation is about to be in this range.
Step 4 4: give an example
How many rolls of wallpaper do you need because of this bedroom?
A. wallpaper specification: 53 centimeters wide *10 meters lengthy, need couple of flowers
B. Wall structure specification: 1. 2.8 meters high * width (4.3 meters +4.3 meters +4.8 meters +4.8 meters +4.8 meters + 4.8-0.98 meters door -2 meters window)= 2.8 meters high *15.22 meters wide 2
C. Calculation results: 1. Confirm the wall height of 2.8 meters, and this wallpaper could be split into three items.2. 3. The upper portion of the door and the low area of the screen are estimated with the addition of 1 roll. 4. End result: 11 rolls of wallpaper.
Step 5: stage 5
The computation of wallpaper, because of the complexity of metope, the indeterminacy of wallpaper pattern, in general, cannot calculate accurate beforehand, always existing redundant or replenishment situation. As a result, we have to explain the situation to the merchants. It’s easier to be more restless and much less restless. If we don’t have the products, we will have a tragedy.
Several issues have to be observed after adding wallpaper
The rooms soon after the wallpaper has been laid ought to be closed and dried. Because the clean wallpaper of the area immediately ventilation will lead to wallpaper edge and drum.
2. Following the completion of wallpaper store, gently clean off the remaining wallpaper glue at the joint with a damp towel 3 days later.
3. Wallpaper is even more resistant to scrubbing, however, not resistant to the collision of blunt objects. If the surface of little areas is available damaged, you can use similar colours or paint to repair.
4. Non-concave and convex wallpaper, simply make use of a feather duster to completely clean on weekdays.
The color of general bedroom had better slant warm, downy some, with benefit at rest. If the home furniture color can be heavy, the wall structure color ought to be very light; If home furniture can be lubricious light, metope USES color of very similar contrast with home furniture to foil properly. The bed room color of newly-married can be event a bit, downy a bit, sweet a little bit, best the colour of the curtain and wallpaper color are close a few, must avoid cold tonal.