The house decoration process is different, and the detail is definitely very much. Wallpaper structure is the final process that the house decorates hard outfit, soft attire begins. The wallpaper should certainly be inside the carpentry, fresh paint, water and electricity, filling all hardware finish, and have been cleaned after one time.
1. Floors and skirting are installed
❖ avoid play keel, saw wood flooring and so on make the wallpaper.
❖ to avoid shock when install the line that play a base, wallpaper and metope separation, thus appeared the wallpaper bubbling, become warped edge phenomenon.
❖ to prevent cutting the line that play a base when ever large amounts of airborne dirt and dust pollution and wallpaper bruised.
❖ general putty is usually not batch to the foundation bottom, first wallpaper aren’t cut neatly, susceptible to become warped edge, with a longer time lead to the wallpaper into the coil.
❖ to prevent the range that play a base meant for glass glue wallpaper seal up, unable to make the wall of the water molecules emissions, lead to the line that play a base location wallpaper mildew.
❖ perform Mica Wallcovering crural line, likely wall membrane and play crural brand straightness is not enough or have crack, the wallpaper has a cover up aperture effect.
2 cover and door are set up
❖ install door initially, can all the wallpaper damaged and getting dirty, also facilitate the repair of paint. Paint mending (gaps in door covers and wall surfaces, and throwing lines) will stain the wallpaper if applied effectively.
❖ door size may possibly have a discrepancy, in the event that small size, wallpaper, primary door will appear clear phenomenon; If fully pasted, it is easy to pull the wallpaper once installing the door, producing injury to the wallpaper.
Wooden paint can not be finished with wallpaper, following making wood paint
❖ because carpentry paint when construction, atomization, the color will stick on 
the wallpaper. And when color construction, want to undertake protecting to finished product, especially the periphery metope such as cabinet, door, partition should stick safety film, if atomize to metope, to the construction quality of wallpaper is definitely not assured, give a problem very easily.
3. Air conditioning holes
❖ avoid wallpaper damage of drilling hole.
❖ prevent wall vibrations cause the wallpaper off when striking.
❖ to avoid dirt pollution when punching picture.
The holes of the curtain hanging rod have been made in move forward
The position of curtain hanger rod support is very well designed and holes will be made to avoid contaminating the wallpaper surface with late punching. In particular, flocking, silk, deep pressure, special materials such because some hard to do wallpaper, prior to paste should be made in advance to hang the curtain rod holes.
Ways to paste the wallpaper
Remove the wall skin: remove the original paint and additional objects around the wall, employ gypsum powder to repair the cracked portions of the wall, and apply the bandage after leveling; In the event the sand and greyish walls, partition walls, but also paste glass fabric or cloth netting; Several of the low quality partitioning or external walls to reach the insulation effect, need to be full of nail plasterboard.
Cut wallpaper: measure metope height first, cut wallpaper length again, have two varieties of circumstance: do not add cut 5 to 8 centimeters by metope height according to metope height left and right sides duration, use as up and down repair edge: to shell out wallpaper needs to consider the symmetry of design and style, reason cut length ought to increase according to actual circumstance, can lengthen 8 to 10 centimeters normally.
Coating adhesive solution: wallpapers glue solution with coating for the back of slicing good wallpaper brush, spend special attention fully glue around the edge to liquid, in order to ensure the construction quality, pasted wall paper and glue in the face of folding place 5-10 moments (attention, nor the external force, in order to avoid wallpaper in crease, especially it’s ok cloth) completely through the glue liquid into the underlying part of the paper can easily be posted, besmear brushs number of wallpapers, every single time and to post.
Wall membrane paper construction: it is usually to be in typically door edge or color Angle from go straight down to paste first wall paper, by scraping panel from go down, by introversion outside, blow paper paper gently, extrude bubble and superfluous glue liquid, make wall paper is usually even close to metope.
Before pasting wallpaper, shut off power: when pasting wallpaper, if encounter the place that has power switch or socket on metope, can turn off total power first, cover wall membrane paper next all electricity supply and socket, trim two diagonals from center of gravity point, can show 4 small triangular, reoccupy art tool takes away all round redundant picture.
Trim cleaning: cut off the excess wallpaper at equally ends of the uppr and lower ends, and make the blade sharpened in order to avoid rough edges. Drop in water with sponge to wipe the stuff liquid that remains about the wall paper surface area completely clean, lest wall structure paper becomes yellow, after wall paper is dry out, if discover a bubble on the surface, cut open with the knife try out glue liquid again press flat can eliminate (with needle tube better)