Along the way of wallpaper paving, many people believe compared with parquet wallpaper, plain wallpaper is simpler and more Modern Style Wallcovering convenient to use without mosaic. It turns out that simple wallpapers are basic and easy to construct because they haven’t any patterns, but the relative stitching requirements are more stringent. Plain colors, especially darker plain shades, are relatively more susceptible to seam problems. If the simple wallpaper has a seam phenomenon, what is the reason behind judging the seam? After that take the correct approach.
1. There is a gap
If the seam is seen at 1.5m on the front side, there is absolutely no color difference in the wallpaper. Is it serious to handle the seams during structure? Most of the factors behind the seams are caused by construction problems.
Approach
1. If the wallpaper is normally a rubberized wallpaper, you can wet the seam with a wet towel, open up the wallpaper glue, carefully pry open the wallpaper, and then utilize the wallpaper softener to soften the wallpaper to stretch the wallpaper and fix the seams.
2. If it’s a real paper wallpaper or a non-woven wallpaper, there is nearly no stretchability, so it cannot be repaired by the above technique. The base can be shaded with a paint-coated seam that is similar in color to the wallpaper.
2.Yin and Yang
If there is obviously zero overall feeling between your wallpaper strips at 1.5m on the front part, the seams of the wallpapers are handled good at close distances, and there is absolutely no obvious seam phenomenon. It appears that the wallpaper appears like a color difference, and the color difference at the seam is in accordance with the apparent law of deep-shallow-deep-light or shallow-deep-shallow-deep, which may be caused by the yin and yang.
Discover the label of this wallpaper and see when there is an alternate label at the top and bottom level of the label – ↑↓.
Approach
1. If there is, it requires to end up being alternately pasted according to the logo design, ie: shallow-shallow-deep-deep in accordance with prevent the phenomenon of yin and yang.
2. When there is no logo design, it is caused by the product quality problem of the wallpaper. There is no solution in fact it is required to respond to the wallpaper sales office.
3 white side
If the bottom paper is found to be slightly longer when the dark wallpaper is constructed, there will be a white edge at the seam after the construction. The gap is normally clearly visible at a distance of just one 1.5 m from leading of the wall.
Approach
1. Because the wallpaper isn’t constructed with simple wallpaper, the seam can be treated by the method of edging.
2. If the wallpaper has been constructed, it can be utilized in the same color as the wallpaper. (That is a versatile method)
4 overflow glue
The plain wallpaper isn’t simple to erase after overflowing with glue, and there are 
residual rubber marks after rubbing.
Precautions
1. When constructing, be certain to check whether there is an “along alternate” construction tag on the wallpaper label. If there is this logo, the wallpaper should be positively and negatively submitted. If there is still a negative and positive surface area phenomenon, you can try normal stickers again.
2, plain color non-woven wallpaper construction should try to avoid spilling glue, avoid wiping, once the wiping strength is certainly large, it may leave traces. If you are unfortunate enough to spill the glue, you should clean the spilled glue in the tiniest range, and the softer color of the ordinary wallpaper should be gentle.
3, rubber surface ordinary wallpaper, the initial wallpaper paste for around 30 minutes must focus on check whether the seams of the wallpaper possess offset printing. When there is offset printing, it implies that the rubberized wallpaper can’t overflow, and the glue will keep traces.