The most common wallpaper problems and solutions!

We generally have these and additional problems when we put up our picture. Especially the friend that a lot of wish to stick picture of oneself start function, it is to adhere to one’s inclinations even more, discovered to stick finally just usually acquired a few small blemish.

In fact, as long as construction attention, these problems can be avoided. Today, a few get out all these complications and focus on solving them!

Basal membrane peeling

1) before cleaning the bottom film, check whether the wall is standard, zero powdering and no flying coating.
2) whether there are minor breaks in the wall structure.
3) whether the structure heat range is over 5 levels.
4) if the initial brush is too heavy, brush the second one before drying. The drying period of the internal and outer layers may trigger peeling.
5) whether the bottom film is Stone paper Wallpapers certainly too solid, drinking water can be added for alleviation. Brush the base film once again after sanding with sandpaper.

The treatment of substrate film has great influence on the wallpaper effect, and the most direct effect is on the stability of the wallpaper. Therefore, the substrate membrane layer must be treated according to the requirements of the guidelines and mixed with the real circumstance.

The glue overflow

Glue overflow is a very common phenomenon in the process of pasting wallpapers, in the construction procedure, we should try our best to avoid the overflow of glue through paper tape, the paper wallpapers is relatively simple to clean, can not make use of paper cassette, all the picture other than the paper tape suggested to make use of paper recording building.

1) clean with a wet cloth or sponge, suitable for scrubbing wallpapers.
2) absorbent with dry bath towel, suitable for wall papers whose surface may not be touched with water.
3) absorbent with a damp cloth or sponge, ideal for wallpapers with granular surface.

Blot at base joint

The treatment of wallpaper joint is the key link of wallpaper construction all the time, a lot of professional construction professionals have got their own tricks. For the layman, in the structure of particular interest. When sticking picture, glue did not come out completely, accumulate at point, time is certainly very long glue and wallpaper rise reaction.

Remedy: take a small bottle of 60-80 degree boiled drinking water and add a bottle of white white vinegar to it. When the drinking water cools, wash it at the joint. (local check is usually suggested) the wallpaper will become more effective in 1-2 months, and 80% traces can become eliminated.

The wallpaper shrinks and warps

Picture contraction phenomenon is mainly the employees in the structure of loose joint parts, resulting in a later period of this problem, and workers with the structure technology. Because picture is normally made by wood pulp, possess the quality of lumber moist bilge dry reduce, efficiency is definitely not really especially steady, after heading up glue liquid can have certain dilatancy, generate systole in drying process. Although the development can not really become controlled, employees can control the contraction during construction.

Most picture contractions are unseen, unless the seams are insufficient. In this case, it is generally feasible to book overlapping parts at bones. Generally, 1-3 cm of overlapping parts at joint parts are better.

If you have already contracted, the repair procedure is relatively simple. Bathe the joint for 10 minutes with a damp towel and pick up the wallpapers with the tip of the wallpapers knife. If the attachment of the wallpapers surface area is definitely metallic surface, scraping conveniently makes the picture surface reduce luster and convert dark, damage the wallpapers surface area beautiful, it is normally not recommended to operate.

The wallpaper moldy

1) the wallpapers is moldy and usually provides areas on the wallpapers surface area.
(1) water seepage should be checked.
(2) whether the glue is completely dried out.
(3) whether there is normally drinking water and surroundings in the picture for a long time, which will trigger mildew when it reacts with glue.
(4) high humidity.
(5) damp wallpaper paste.

Mould of picture is the issue that the person that stays picture worries, also be to appear after solve difficulty coefficient a single of the biggest complications, accordingly, this kind of issue, wish with prevent give priority to. It is normally greatest to prevent moist and damp work in progress.

So, after wallpaper appears this sort of problem, perform not possess solution? Of program not really.

2) treatment method
(1) the mildew stage is small. It is certainly recommended to clean it with fertilizer or detergent and dry it with a hair dryer.
(2) with bleach, it is certainly simple to irritate the skin and may cause the picture to lose color. It is certainly not recommended to make use of.
(3) if the mildew point is definitely huge, the wallpapers should end up being replaced. If the drinking water seepage is normally triggered by the wall structure, this issue should end up being resolved thoroughly before Publishing.